Neural DSP
Quad Cortex
- Parameters
- 31
- Sections
- 6
- Pages on Karl
- 3
Neural DSPQuad CortexPage 1/3
- Bank Select MSBPreset group 128-256
- Bank Select LSB64
- Expression Pedal 164
- Expression Pedal 264
- Footswitch AEnable/bypass Footswitch A
- Footswitch BEnable/bypass Footswitch B
- Footswitch CEnable/bypass Footswitch C
- Footswitch DEnable/bypass Footswitch D
- Footswitch EEnable/bypass Footswitch E
- Footswitch FEnable/bypass Footswitch F
- Footswitch GEnable/bypass Footswitch G
- Footswitch HEnable/bypass Footswitch H
Full CC map
Banks and presets
| Parameter | Message | Range | Values |
|---|---|---|---|
| Bank Select MSBSplits the 256 Presets into two groups of 128 | CC 0 | 0–1 | 0: Preset group 0-127; 1: Preset group 128-256 |
| Bank Select LSBSetlist select. Combine with a Program Change to recall a Preset | CC 32 | 0–127 |
Pedals
| Parameter | Message | Range | Values |
|---|---|---|---|
| Expression Pedal 1 | CC 1 | 0–127 | |
| Expression Pedal 2 | CC 2 | 0–127 |
Footswitches
| Parameter | Message | Range | Values |
|---|---|---|---|
| Footswitch AEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 35 | 0–127 | 0–127: Enable/bypass Footswitch A |
| Footswitch BEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 36 | 0–127 | 0–127: Enable/bypass Footswitch B |
| Footswitch CEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 37 | 0–127 | 0–127: Enable/bypass Footswitch C |
| Footswitch DEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 38 | 0–127 | 0–127: Enable/bypass Footswitch D |
| Footswitch EEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 39 | 0–127 | 0–127: Enable/bypass Footswitch E |
| Footswitch FEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 40 | 0–127 | 0–127: Enable/bypass Footswitch F |
| Footswitch GEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 41 | 0–127 | 0–127: Enable/bypass Footswitch G |
| Footswitch HEnable/bypass. Applies in Preset, Stomp, and Scene Mode, and in Gig View | CC 42 | 0–127 | 0–127: Enable/bypass Footswitch H |
Modes and scenes
| Parameter | Message | Range | Values |
|---|---|---|---|
| Scene Select | CC 43 | 0–7 | 0: Scene A; 1: Scene B; 2: Scene C; 3: Scene D; 4: Scene E; 5: Scene F; 6: Scene G; 7: Scene H |
| Mode Select | CC 47 | 0–2 | 0: Preset Mode; 1: Scene Mode; 2: Stomp Mode |
Global controls
| Parameter | Message | Range | Values |
|---|---|---|---|
| Tempo BPMEach message received registers a tap | CC 44 | 0–127 | |
| Tuner On/Off | CC 45 | 0–127 | 0–63: Off; 64–127: On |
| Gig View Open/Close | CC 46 | 0–127 | 0–63: Close; 64–127: Open |
Looper
| Parameter | Message | Range | Values |
|---|---|---|---|
| Open/Close Looper UIAlways opens in Perform Mode | CC 48 | 64–127 | 64–127: Open |
| Duplicate/Stop Duplicate | CC 49 | 64–127 | 64–127: Duplicate/Stop Duplicate |
| One Shot Enable/Disable | CC 50 | 64–127 | 64–127: Enable/Disable One Shot |
| Half Speed Enable/Disable | CC 51 | 64–127 | 64–127: Enable/Disable Half Speed |
| Punch In/OutValue 0-63 only works when the parameter is set to momentary and is sent on MIDI controller footswitch release | CC 52 | 0–127 | 0–63: Punch Out; 64–127: Punch In/Punch Out |
| Record/Overdub/StopValue 0-63 only works when the parameter is set to momentary and is sent on MIDI controller footswitch release | CC 53 | 0–127 | 0–63: Stop Recording; 64–127: Record/Overdub/Stop |
| Play/Stop | CC 54 | 64–127 | 64–127: Play/Stop |
| Reverse Enable/Disable | CC 55 | 64–127 | 64–127: Enable/Disable Reverse |
| Undo/Redo | CC 56 | 64–127 | 64–127: Undo/Redo |
| Duplicate Mode | CC 57 | 0–1 | 0: Free; 1: Sync |
| Quantize | CC 58 | 0–9 | 0: Off; 1: 1 Beat; 2: 2 Beats; 3: 3 Beats; 4: 4 Beats; 5: 5 Beats; 6: 6 Beats; 7: 7 Beats; 8: 8 Beats; 9: 16 Beats |
| MIDI Clock Start | CC 59 | 0–1 | 0: Off; 1: On |
| Perform/Params Mode | CC 60 | 0–1 | 0: Perform Mode; 1: Params Mode |
| Routing ModeGrid > I/Os > Multi Out | CC 61 | 0–13 |